Quick Start

- Drive the Input: The AL-1's threshold is fixed at 0 dBFS. Increase the Input to begin limiting.
- Select your Engine: The AL-1's allows you to choose between two complete limiting Engines. Engine 1 is utilizes our digital algorithms while Engine 2 uses a bespoke analog circuit we created digitally using our physics based modeling technology.
- Pick a Voicing: Start on 1 for transient dense material; try 2 when you need a bit more control; try 3 for a smoother more glued sound.
- Set your Action: Use the stepped Response/Recovery controls to dial in the movement of your limiting.
- Tweak out a little: Adjust the Detector and Bias to fine tune the limiting character even further.
- Keep the Focus: Enable Stereo Linking and dial in the controls to bring a focus to the mid channel while leaving the rest of the source untouched.
- Optimize for Loudness: Adjust the Makeup and Lift to set the limits of the maximizer.
- Check your Loudness: Use our integrated LUFS readouts (Momentary, Short‑Term & Integrated) to ensure you're competitively loud.
In Practice: First pass on the Mix Bus
Engine: 2. Voicing: 1. Response: 9–11. Recovery: 1–3. Detector: Slow. Linking: On at defaults. Maximizer: On at defaults. Drive the Input for 2–4 dB peak gain reduction. Adjust by ear.